No rules, other than mutual respect and common sense, apply here. We encourage sharing secrets to enhance and promote growth. We aim to foster an exchange of ideas on advancing the art. You can always send us confidential requests directly if you wish.

ForumExample Category: 3D 💡 Ideas & RequestsThe 6 color Changing Cube

Please or Register to create posts and topics.

The 6 color Changing Cube

#1 · June 18, 2022, 3:41 am

Hello everyone, came across this

which can be an cool 3d build

https://youtu.be/7kJw_myyEOs

Like the gozenta boxes we have the advantage in the precision of the nesting boxes. It goes well with the rubik's stratosphere as a transition trick.

I was thinking to start with a puzzle cube size and go from there with each box being 1mm thick and 1mm tight space.

With cube being 56mm, 6 nesting boxes the biggest one will be 73mm. I'm not sure if it will look awkward, or the idea of having full puzzle cubes with one color will make an ok routine. But it's easy 3d build with few glued magnets, it packs small. And with a vinyl cutter, you can make any graphic design on the box.

What do you think?

#2 · June 18, 2022, 3:42 am

Avoiding the whole idea of a puzzle cube. you can print in different filament colors and avoid stickers etc. but it is just like the japanese guy in the video - a dry routine.

looking at the pic below . I might use only 2 smaller boxes only, (red and yellow), and with the cube being green I can do the "rule of 3" routine after the cube stratosphere trick. This way avoids the bigger boxes that look suspiciously way larger than the puzzle cube.

what do you think?

I will send you the stl files for models below - but first test the first model, im leaning toward puzzle cube look rather than flat walls

Uploaded files:

#3 · June 18, 2022, 4:09 pm

Here is a zipfile with 4 nesting cubes that has a rubik cube shape

https://3dmagictricks.com/wp-content/uploads/2022/06/69mm-6-nesting-boxes.zip

only concern is the wall are thinner than 1mm due to the cube curves in the middle . i haven't tested the prints yet- also I'm not sure if the difference between the largest box and the actual Rubik's cube are awkwardly noticeable . if so, creativity is needed or 2 smaller boxes can be used with a creative routine.

if prints are too flimsy or fragile - we can convert to straight walls and change the theme

If boxes are too tight (specially after adding color stickers) we can widen the cavity or use different color filament for each print

let me know how it turns out

ps. I will post the lid cover box soon. be tuned

Uploaded files:

#4 · June 18, 2022, 7:33 pm

Updated stl files. I fixed the wall thickness to allow to print .

https://3dmagictricks.com/wp-content/uploads/2022/06/nesting-boxes.zip

#5 · June 18, 2022, 9:38 pm

Result of the first cube nest perfectly with the Hasbro brand Rubik's cube. the thin layer is ok, sturdy enough if you don't break it .

with the full 1mm think it's really hard to rip a 4 sided box, however I managed to rip the .5 section with force. So I suppose its a DIY quality prop, meaning you can just print one if it breaks .

I am testing the 2nd 63mm shell which will nest with the 60mm shell. There is the vinyl stickers to consider.

Will update the result as the print completes

#6 · June 21, 2022, 4:07 am

here is the cubes I printed.

Uploaded files:

emadgic has reacted to this post.

#7 · June 21, 2022, 7:48 pm

There is 2 to 3mm space for a magnet to be glued on the edge. I did align all magnets to they can pull each other.

Pic show difference between the largest box with the actual cube .

I picked the 3 colors white , blue and orange to complete the stratosphere cube trick.. still need to work on the routine.

As for the functionality, effect works great. When pulling each nested cube you need to practice to pull slowly so other cube under don't lift up with air pressure.

Il try posting a video next

Uploaded files: