Hoppity Rabbit – Magic Trick

This project requires a printer bed with dimensions of 300mm x 300mm.

Please note that only STL files are shared, and no physical props will be shipped. Instead, you will receive a download link for a zip file and a link to an instructional assembly video.

Follow these instructions for printing:

• Print Rabbits (A, B, & optionally C) using Black filament to conceal the cavity in between.
• When printing the Box, use the “Brim” bed adhesion setting instead of “skirt.”

All other settings should remain as default PLA settings.

In addition to the printed components, you will need the following materials:

• Magnets: 7×1 n52 magnets Available for purchase here
• Glue: Gorilla Clear Polyurethane
• For coloring, use either Sharpie Oil-Based Paint Markers or Sharpie Silver Fine Point.
• To protect the paint, apply Spray Paint, Matte Clear.

Optionally, you may use Elmer’s Painters Opaque Paint Markers.